This is a heavy duty flatbed trailer used for hauling larger machinery,
loaders, skid steers, tractors and farm equipment.
This trailer has proven to be very popular with area farmers for hauling.
It is a heavy duty design, with treated deck, which is above the tires
for a smooth full width (100") and no fenders to get in the way. With a
5 foot "self cleaning" beaver tail, and spring assisted fold up ramps,
you can drive right up on it. Fold the ramps back flat, lay a sheet of
plywood across them and you can load right out past the end of the trailer!
Why by JUNK twice???
Heavy duty 12 inch I beam frame, with 3" channel cross members every 24 inches. The back 5 feet of the frame drops for the beaver tail.
Treated wood deck, 96" wide, (101" overall width) with 20 feet of flat deck, and a extra 5 foot steel "self cleaning" beaver tail on the back.
"Rub rail" down both sides to both protect the bed, and attaching straps or chains to. Stake pockets approximately every two feet down both sides.
Heavy duty goose neck hitch with adjustable height 2 5/16 ball coupler, 12" I beam construction.
3 inch channel "head ache" rack on front of trailer.
Heavy duty 5/16 safety chains with Forged hooks.
Electric brakes on both axles (all wheels) with emergency battery and switch for break away protection.
Heavy duty, 12,000# spring loaded Drop leg jack
Chain box built in front for chain or tool storage
Tandem axle, 7000 pound capacity EACH, with easy lube greasble bearings
4 new 16 inch load range E RADIAL tires with 8 hole white spoke wheels, chrome caps and lug nuts.
Five foot steel beaver tail with 5' spring assist fold up ramps (you can tilt them up with one hand!).
Full DOT lighting. Lights are of the "Sealed" type for long trouble free operation.
DOT Red/White Reflective Conspicuisity tape applied on all sides!
Trailer is primed and covered with two coats of Automotive grade Acrylic Enamel, with a special harder to improve durability and adhesion.
Underside of trailer is completely covered in a Rubberized undercoating to resist rust!
Are you tired of trailers that always seem to have wiring problems? Read this:
Wire ran inside steel or plastic
conduit for protection for the long haul, and EVERY connection and
wire splice used in this trailer is silver soldered for a permanent connection
that will NEVER get loose or corroded and go bad. That's right, every
splice is soldered, then sealed either in shrink tube, or silicone
filled insulators for a water proof seal
Total Base price fully equipped as above: $4995.00
Options: (many more options
are available, just call for a quote!)
Spare tire................................................................................$149.00
Spare tire mount......................................................................$35.00
To add extra 2 feet to length of trailer.......................................$200.00
To add extra 4 feet to length of trailer.......................................$400.00
Oil Bath Axles (the best lubrication available!)..........................$175.00
LED lights, add $150.00 (recommended for long
service life)...$150.00
Add and extra "center ramp"...................................................$125.00
Center "lift up" Beaver tail (for loadng on beaver
tail)................$250.00
Locking chain box lid...............................................................$65.00
Add Second 12,000# Drop Leg jack.......................................$125.00
The trailer described here is only one
example of many available! The weight, deck size, and other special
options available are practically endless, so to have a trailer built to
YOUR specs, just let us know!
Still want to see more of this trailer??? Click here for more detail pictures!
I gladly accept Mastercard, Visa, Pay Pal, a good check, or even cash!
Back to R and P Carriages home page
Email me for a quote or questions
R and P Carriages, 431 North Main Street, Seneca, IL 61360, 815/357-3292