This is a heavy duty flatbed trailer used for hauling larger machinery,
loaders, skid steers, tractors and farm equipment.
This trailer has proven to be very popular with area farmers for hauling.
It is a heavy duty design, with treated deck, which is above the tires
for a smooth full width (100") and no fenders to get in the way. With a
5 foot "self cleaning" beaver tail, and spring assisted fold up ramps,
you can drive right up on it. Fold the ramps back flat, lay a sheet of
plywood across them and you can load right out past the end of the trailer!
Why by JUNK twice???
Heavy duty 12 inch I beam frame, with 3" channel cross members. The back 5 feet of the frame drops for the beaver tail.
Treated wood deck, 100" wide, with 25 feet of flat deck, and a extra 5 foot steel "self cleaning" beaver tail on the back.
"Rub rail" down both sides to both protect the bed, and attaching straps or chains to.
Heavy duty goose neck hitch with adjustable height 2 5/16 ball coupler, I beam construction.
3 inch channel "head ache" rack on front of trailer.
Heavy duty 5/16 safety chains with Forged Latching hooks.
Electric brakes on both axles (all wheels) with emergency battery break way system break away protection.
Heavy duty tandem 12,000 pound Capacity Drop leg jack "landing gear"
Chain box built in front for chain or tool storage
Tandem axle, 10,000 pound capacity EACH, Oil filled bearing lubrication, with oil level site glass.
8 new 16 inch (235 85 R 16) load range E Radial tires with 8 hole "dually" wheels.
Five foot steel beaver tail with 5' spring assist fold up ramps (you can tilt them up with one hand!).
Full DOT lighting. Lights are of the "Sealed" type for long trouble free operation.
DOT Red/White Reflective Conspicuisity tape applied on all sides
Underside of trailer is completely covered in a Rubberized undercoating to resist rust!
Are you tired of trailers that always seem to have wiring problems? Read this:
Wire ran inside steel or plastic conduit for protection for the long haul, and EVERY connection and wire splice used in this trailer is silver soldered for a permanent connection that will NEVER get loose or corroded and go bad. That's right, every splice is soldered, then sealed either in shrink tube, or silicone filled insulators for a water proof seal
Total Base price equipped as above: $6990.00
Options: (many more options
are available, just call for a quote!)
Spare tire and wheel................................................................$169.00
Spare tire mount......................................................................$35.00
To add extra 2 feet to length of trailer.......................................$200.00
To add extra 4 feet to length of trailer.......................................$400.00
Oil Bath Axles (the best lubrication available!)..........................Standard
LED lights, add $150.00 (recommended for long
service life)...$150.00
Add and extra "center ramp"...................................................$125.00
Center "lift up" Beaver tail (for loadng on beaver
tail)................$250.00
Locking chain box lid...............................................................$65.00
Side mount 4' tool boxes, each.................................................$250.00
Trailer is also available at a LOWER COST with 18,000 pound axles, and the deck can be shortened. The trailer described here is only one example of many available! The weight, deck size, and other special options available are practically endless, so to have a trailer built to YOUR specs, just let us know!
I gladly accept Mastercard, Visa, Pay Pal, a good check, or even cash!
Back to R and P Carriages home page