The Sure Trac Tilt Bed Equipment trailer is built to handle your most demanding work load. The trailer has a gravity down bed nested securely inside an amazingly strong heavy duty 6 inch C-channel frame.. This trailer allows an operator to load heavy and dangerous equipment without cumbersome ramps or gates. The bed is cushioned as it gently comes to rest using a hydraulic dampening cylinder. The cylinder is mounted to a heavy duty 3 x 3 x 1/4 inch tube for added strength and security. The pivot hinge has grease zerks for easy maintenance to provide a lifetime of trouble free smooth rotation. The loading Knife Edge deck plate is a heavy 5/16 tread plate with 1/4 inch gusset transition supports to support the heavy equipment this trailer is designed to carry.

6" Channel Main Frame
3" channel cross members on 16" Centers
2-5/16 Adjustable height coupler (can be switched to Pintle eye)
7,000# Drop Leg Jack
Forged Steel Safety Chains with latch hooks
Diamond Plate Steel Light mounts
Diamond Plate Steel Fenders, with center supports
Knife edge Beaver tail (no bump up onto deck!)
Powder Coated Finish!
All wire ran in steel Conduit
All sealed Water Proof Lights
All Gel Filled SUBMERSIBLE electrical connections!
12" Electric Brakes on all wheels
Battery Break Away System
Easy Lube Axle bearings, all wheels
6000# Spring Axles, with 4" drop (LOWWW DECK!)
16" Eight hole wheels, with 7.50 x 16 Trailer tires, Load range E
Single handle deck latch with no loose pins or keepers!
Extended length tongue
18.5 foot deck, 81.5" between fenders
Fenders 12" above Deck
Floor height only 20 inches off the ground!
Load angle a low 11 degrees!

Press fit treated wood deck screwed down every 4 feet!

Curb weight 3180 pounds

Powder Coated Finish!

4 D Rings On deck, PLUS Stake pockets all around!

8 Lug wheels, Easy Lube Hubs, HD Fenders!

Knife edge for smooth bumpless approach.

Only 11 degree tilt to load!

Battery Break Away, 7 K Drop leg jack, Adjustable coupler.

Locked Deck

Deck unlocked, simple and easy!

3" channel on 16" centers, Powder Coated.
Hydraulic shock for a slow tilt.

In stock, located in Seneca, IL 61360
    

Shipping:
I am located in Seneca Illinois, about 25 miles west of Joliet, ILL and will deliver to the Joliet, South Chicago area free. I am always driving around and may be able to deliver, so e mail me, I am sure we can work something out! I will deliver up to 400 miles from 61360 at a rate of $1.25 per loaded mile. If I am going your way anyway, or you live in a place I would like to visit, we may be able to deliver further, or at least at a lower rate. Just ask!  I make regular trips to Arkansas, St Louis, And North East IN and other places, so lets make a deal! You must e mail or call me to make arrangements before the auction ends. Click here for a map to my location

Other fees:
This is a new trailer, never titled. If you are a Illinois resident, you must pay 6.25% sales tax, and all state required title and license fees.  All paperwork for your tags will be handled by me (at NO extra charge) so you don't have to go to your local DMV and wait in line! I can even handle a plate transfer if you want to switch plates from a trailer you already have. Out of state buyers will be furnished with a notarized bill of sale, a manufactures statement of origin, and a temporary drive away permit. ($10.00) Some other states require that I collect sales tax ( residents of AZ, CA, FL, HI, IN, MA, MI, SC & VT will pay applicable sales tax.) so if you are concerned about tax in your state, email me.
 

Payment methods:
I now accept VISA and Mastercard directly, so you can just charge it when you pick it up, or call ahead and we can take care of it over the phone! I also accept local checks, bank checks, cash, and pay pal.