Brake controller will have 4 wires to connect. (I quote Tekonsha wire colors, but many brands are the same)
Blue wire will run to the back of the truck, and connect to the Blue (brake) terminal on the trailer plug (drill a hole in the firewall and run the wire under the truck)
White wire is to frame ground. (find a screw under the dash)
Black wire is battery feed, hook to stud in fuse panel under dash (through that same hole you drilled for the blue wire)
Tap into this wire with a side tap (scotch lock) for the brake light feed (red wire)
Home | Trailers | Parts | Rentals | Help Section | Contact Us
Questions? Email the Webmaster!
Copyright© R and P Carriages 2015