R and P Carriages


Home Trailers Parts Rentals Help Section Contact Us
2008-2010 Ford Super Duty Brake Controller Installation
(Other Years May Be the Same or Similar)

Please visit my general install page for overall instructions

I sell brake controllers, so please, if you need one click here! We keep Prodigy P2 Brake Controllers in Stock Regularly!

"Standard" Wire colors to the controller (Tekonsha and others):
- Black, Battery Positive to controller
- White, Negative Ground for Controller
- Blue, Brake feed from controller to Trailer plug at back of truck
- Red, tap into truck Brake light switch signal to tell controller to apply brakes

Simple "Plug and play" set on these trucks with the tow package. Find the plug under the dash, plug in the controller, mount the controller, done!



Remember, the above colors are just a GUIDE. your colors may be different, read the instructions!

2008 Ford Super Duty

With 2 or 3 screwdrivers, carefully pry out change pocket

2008 Ford Super Duty

Un-plug it from back of change pocket

2008 Ford Super Duty

2008 Ford Super Duty

2008 Ford Super Duty

 

 


Home | Trailers | Parts | Rentals | Help Section | Contact Us
Questions? Email the Webmaster!
Copyright© R and P Carriages 2015