Trailer Parts, Service, Sales and Rentals
Robin and Paul
SpeedLoader MX Tiltbed Trailers
Car Hauling Made Easy
Walking around to the rear of the SpeedLoader MX tiltbed trailer you can see just how accommodating this flatbed trailer really is.
Just drive your car onto the trailer. An 18 foot tiltbed trailer will accommodate most low riding cars. For other, more exotic cars, or cars with excessive front overhang (the amount of space between the front bumper and the front tires) we recommend our longer models like the 20, 22 or 24 foot lengths.
Once you car is loaded on the trailer you get out of your car and lower the trailer. All H&H SpeedLoader MX and EX trailers have a low standard 8.5 inch fender height so you wont have to worry about hitting your doors on them.
Always remember to load your car with the weight bias toward the front of the trailer. Dont worry, our SpeedLoader MX trailers can handle the weight.
NOTE: this 18 foot SpeedLoader MX tilbed trailer has following standard features:
5" channel steel frame and tongue with greaseable swivel tongue
3" channel steel crossmembers
Fully undercoated frame and chassis
10 year limited frame and tongue warranty
#1 grade ACQ treated 2x10 wood floor with lifetime floor rot warranty
Tandem steel Y braced fenders with 8.5" height from floor
Tandem 3500lb axles (7000lb gross trailer and load capacity) with two electric brake axle
C rated ST205/75-15 trailer tires on white spoke wheels
Steel guarded tail, marker, stop and turn lights
Fender mounted license plate bracket with light
Cargo stop bar on front of bed
2 5/16" coupler
Dual safety chains
7,000lb rated dropleg jack set back in tongue for tow vehicle tailgate clearance
12 standard stake pockets/tie down points, 6 per side of trailer
Full Phosphate coating, primer and enamel paint finish with hand applied pinstriping
The New H and H MX speed Loader IS BACK and better than ever! Now with All LED lighting, Easy Tilt, Easy load, and Fully Sandblasted, Primed and painted!
